{"id":802,"date":"2025-06-24T06:18:53","date_gmt":"2025-06-24T06:18:53","guid":{"rendered":"https:\/\/kldwinch.com\/?p=802"},"modified":"2026-10-12T08:39:15","modified_gmt":"2026-10-12T08:39:15","slug":"cabrestante-electrico-portatil-para-traccion-de-cables-de-220-v","status":"publish","type":"post","link":"https:\/\/kldwinch.com\/es\/portable-electric-cable-pulling-winch-220v\/","title":{"rendered":"Portable Cable Hauling Winch 500kg Foot Switch | KLD"},"content":{"rendered":"<p class=\"wp-block-paragraph\">A portable cable hauling winch built for heavy cable laying work, used as an auxiliary hauling device. The U-groove drum improves friction output for smoother cable laying. A right-angle gear motor, a separate control box and a foot switch make operation simpler and support operator flexibility and safety. 220 V single-phase input suits a range of working situations.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Especificaciones r\u00e1pidas<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Model: 500kg  |  Rated tension: 500 kg  |  Motor power: 0.75 kW\nRope diameter: 6 mm  |  Reel speed: 17.75 rpm  |  Average rope speed: 5 m\/min<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Escenarios de aplicaci\u00f3n y l\u00edmites aplicables<\/strong><\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>- Cable laying assistance \u2014 designed for heavy cable laying work as an auxiliary hauling device; the U-groove drum improves friction output so the cable runs smoothly.\n- Cable pulling over short, repeatable runs \u2014 the case unit has a 500 kg rated tension with a 5 m\/min average rope speed and a 6 mm rope, which suits steady, controlled hauling rather than high-speed winding.\n- Work where the operator must stand clear of the machine \u2014 a separate control box can be placed at a different position and the foot switch allows flexible operation by the worker.\n- Sites with single-phase power only \u2014 1P \/ 220V \/ 50Hz input adapts to typical standard electrical equipment on site.\n- Portable \/ relocatable duty \u2014 the machine is a compact foot-mounted unit (about 270 mm wide) with lifting rings, so it can be moved between work positions.\n\nBoundary: the case model is 500 kg rated tension with a 0.75 kW motor, 17.75 rpm reel speed and 5 m\/min average rope speed; 6 mm rope; 1P\/220V\/50Hz supply; whole machine weight 65 kg per drawing (50 KG per detail page table). Outline 270 \u00d7 462 \u00d7 639 mm per detail page (drawing 270 \/ 461.85 \/ 628.77 mm). This is a non-standard product; load, speed, rope length, control mode, rope exit direction and material are customized to site requirements. Confirm the duty, rope length, power supply and mounting interface before ordering.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Caracter\u00edsticas Beneficios<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Better friction output \u2014 the U-groove drum makes it easier for the winch to deliver friction power, so hauling is more consistent.<br>Quiet, efficient drive \u2014 the right-angle gear motor runs quietly, which reduces noise pollution and improves working comfort.<br>Control from where you need it \u2014 the separate control box can be placed at a different position so the machine can be controlled from a distance, which supports working safety and convenience.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Especificaciones t\u00e9cnicas completas<\/h2>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"377\" src=\"https:\/\/kldwinch.com\/wp-content\/uploads\/2025\/06\/\u4e8c\u7ef4\u56fe-12-1024x377.jpg\" alt=\"\" class=\"wp-image-1346\" title=\"\" srcset=\"https:\/\/kldwinch.com\/wp-content\/uploads\/2025\/06\/\u4e8c\u7ef4\u56fe-12-1024x377.jpg 1024w, https:\/\/kldwinch.com\/wp-content\/uploads\/2025\/06\/\u4e8c\u7ef4\u56fe-12-300x110.jpg 300w, https:\/\/kldwinch.com\/wp-content\/uploads\/2025\/06\/\u4e8c\u7ef4\u56fe-12-768x282.jpg 768w, https:\/\/kldwinch.com\/wp-content\/uploads\/2025\/06\/\u4e8c\u7ef4\u56fe-12-1536x565.jpg 1536w, https:\/\/kldwinch.com\/wp-content\/uploads\/2025\/06\/\u4e8c\u7ef4\u56fe-12.jpg 1588w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td>Modelo: 500 KG<\/td><td>Potencia del motor: 0,75 kW<\/td><td>Tensi\u00f3n nominal: 500 kg<\/td><td>Di\u00e1metro de la cuerda: 6 mm<\/td><\/tr><tr><td>Velocidad de rotaci\u00f3n del tambor: 17,75 rpm<\/td><td>Velocidad media de la cuerda: 5 m\/min<\/td><td>Peso: 50 kg<\/td><td>Tensi\u00f3n nominal: 1P\/220V\/50HZ<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td>Modelo: 500 KG<\/td><td>A (Longitud): 270 mm<\/td><td>B(Ancho): 462 mm<\/td><td>C(Altura): 639 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Tama\u00f1o Instalaci\u00f3n e interfaz del sistema<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Outline (case 500kg): 270 \u00d7 462 \u00d7 639 mm (A length \u00d7 B width \u00d7 C height) per the detail page; drawing values 270 \/ 461.85 \/ 628.77 mm.\nBase \/ mounting: a foot-mounted base plate with slotted mounting holes; the drawing shows bolt slots on the base flange. Confirm the hole pattern and the structural interface on the approved drawing.\nDrive: right-angle gear motor (0.75 kW) mounted vertically on the gearbox housing; the motor is a separate assembly bolted to the frame.\nDrum: U-groove drum with a rope path width of 170 mm per drawing; rope diameter 6 mm.\nLifting points: lifting rings are fitted for moving the unit; the drawing views show two rings.\nControl interface: separate control box connected to the machine, plus a foot switch .\nElectrical: 1P \/ 220V \/ 50Hz single-phase input; confirm the plug type and cable length for the site.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Control, seguridad y protecci\u00f3n<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>- Control: separate control box that can be positioned away from the machine, plus a foot switch for hands-free operation.\n- Drive: right-angle gear motor, quiet running; 0.75 kW.\n- Drum \/ rope: U-groove drum for friction pull; rope diameter 6 mm; reel speed 17.75 rpm; average rope speed 5 m\/min.\n- Rated tension: 500 kg.\n- Electrical: 1P \/ 220V \/ 50Hz single-phase; confirm earthing and protection for the site.\n- Lifting \/ moving: lifting rings fitted; the machine is a compact single unit.\n- Recommended to confirm: duty classification, required brake or holding arrangement, limit switch type and the maximum cable tension for the specific cable being laid.\n- Optional: pulley, limit switch, grooved drum, drum divider flange, manual emergency crank, VFD control panel, encoder with main-shaft limit switch, pendant remote control, rope follower, winding device, slack-rope switch, slip ring, class certificates (LRS \/ BV \/ ABS \/ DNV GL).<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Opciones de personalizaci\u00f3n y proceso de ingenier\u00eda<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Configured around your operating conditions \u2014 Share the required line pull, rope length, operating speed, duty cycle, power supply, installation envelope and environment. KLD will review the application and provide a proposed configuration, technical drawing and quotation for approval. Free design schematics are provided for different scenarios.\nRequirements \u2192 Concept \u2192 Drawing &amp; Quotation \u2192 Approval \u2192 Production &amp; Test \u2192 Delivery<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Normas, pruebas y calidad<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>The company operates an ISO 9001 quality management system. CE conformity documents (LVD, EMC) are available for applicable configurations on request.\n\nFactory testing follows the approved technical specification for each configured unit and may include: no-load run, rated-load operation, brake holding function and control verification. Available documentation may include dimensional drawings, electrical diagrams, inspection records and functional test results, depending on project scope.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Casos de ingenier\u00eda<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>a cable laying project needed an auxiliary hauling device to pull heavy cable over a short, repeatable run. The site had only single-phase power available, and the operator needed to control the machine while standing away from the hauling point, with both hands free.\n\nSolution: portable cable hauling winch PJD-500 \u2014 500 kg rated tension, 0.75 kW right-angle gear motor, 17.75 rpm reel speed and 5 m\/min average rope speed; 6 mm rope; U-groove drum to improve friction output; separate control box plus foot switch; 1P\/220V\/50Hz single-phase input. Outline 270 \u00d7 462 \u00d7 639 mm. Two spare motors of the same model and three sets of service shims were supplied with the unit.\n\nOutcome: the unit met the project's rated tension, power supply and operator-control requirements, and passed the customer's acceptance procedure.<\/code><\/pre>\n\n\n\n<pre class=\"wp-block-code\"><code>a cable laying project needed an auxiliary hauling device to pull heavy cable over a short, repeatable run. The site had only single-phase power available, and the operator needed to control the machine while standing away from the hauling point, with both hands free.\n\nSolution: portable cable hauling winch PJD-500 \u2014 500 kg rated tension, 0.75 kW right-angle gear motor, 17.75 rpm reel speed and 5 m\/min average rope speed; 6 mm rope; U-groove drum to improve friction output; separate control box plus foot switch; 1P\/220V\/50Hz single-phase input. Outline 270 \u00d7 462 \u00d7 639 mm. Two spare motors of the same model and three sets of service shims were supplied with the unit.\n\nOutcome: the unit met the project's rated tension, power supply and operator-control requirements, and passed the customer's acceptance procedure.<\/code><\/pre>","protected":false},"excerpt":{"rendered":"<p>A portable cable hauling winch built for heavy cable laying work, used as an auxiliary hauling device. The U-groove drum improves friction output for smoother cable laying. A right-angle gear motor, a separate control box and a foot switch make operation simpler and support operator flexibility and safety. 220 V single-phase input suits a range [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":804,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2,37,87],"tags":[],"class_list":["post-802","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","category-cable-pulling-umbilical-winches","category-cable-pulling-winches"],"_links":{"self":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/802","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/comments?post=802"}],"version-history":[{"count":7,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/802\/revisions"}],"predecessor-version":[{"id":8053,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/802\/revisions\/8053"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/media\/804"}],"wp:attachment":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/media?parent=802"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/categories?post=802"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/tags?post=802"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}