{"id":820,"date":"2025-06-24T08:07:31","date_gmt":"2025-06-24T08:07:31","guid":{"rendered":"https:\/\/kldwinch.com\/?p=820"},"modified":"2026-10-13T06:38:57","modified_gmt":"2026-10-13T06:38:57","slug":"cabrestante-de-cable-con-anillo-colector-electrico-fabricante-de-cable-compuesto-suministro-de-cabrestante-industrial-de-cable-de-acero","status":"publish","type":"post","link":"https:\/\/kldwinch.com\/es\/cable-winch-with-electric-slip-ring-composite-cable-manufacturer-supply-wire-rope-industrial-winch\/","title":{"rendered":"Cable Winch 300kg Composite Cable Rope Slip Ring Rope Guider | KLD"},"content":{"rendered":"<p class=\"wp-block-paragraph\">A cable winch built for airship ground testing as an umbilical winch. A composite cable rope carries both power and communication, which reduces the number of separate connections. Fitted with an electric slip ring, an automatic rope guider, a clutch device and a quiet motor. Case configuration: 300 kg rated pull, rope \u00d86 mm \u00d7 300 m, 2.2 kW, rope speed 40\u201360 m\/min.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Quick Specs<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Model: 300 KG  |  Rated pull: 300 kg  |  Cable rope diameter: 6 mm  |  Rope length: 300 m\nMotor power: 2.2 kW  |  Drum speed: 48.5 rpm  |  Rope speed: 40\u201360 m\/min<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Application Scenarios and Applicable Boundaries<\/strong><\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>- Airship ground testing \u2014 the case configuration is built for this duty: the composite cable rope carries power and communication to the airborne platform while the winch controls its height.\n- Test benches that need power + signal to a moving load \u2014 the electric slip ring passes supply and signal lines while the drum rotates, so continuous rotation does not require a cable loop to unwind.\n- Applications needing a quieter test environment \u2014 a quiet motor is specified to keep test-area noise down during high-speed running.\n- Installations needing on-site manual intervention \u2014 a clutch device allows the rope guider to be adjusted by hand, and a hand wheel is provided (drawing item 24).\n- Long rope runs \u2014 300 m of \u00d86 mm cable rope on a 711 mm single-plate reel.\n\nBoundary: the case configuration is 300 kg rated pull, rope \u00d86 mm, rope length 300 m, motor 2.2 kW, drum speed 48.5 rpm, rope speed 40\u201360 m\/min, outline 960 \u00d7 799 \u00d7 1030 mm. This is a reference configuration. Before ordering, confirm: required rated pull, rope speed range, cable rope construction and conductor count, rope length and drum capacity, required power and signal channels through the slip ring, slip ring current\/voltage rating and channel count, clutch requirement, control mode, power supply, duty classification and ingress protection.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Features Benefits<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Automatic rope guider \u2014 lays the cable rope in order as it winds, which helps prevent tangling and disorderly spooling.<br>Composite cable rope \u2014 carries power and communication in a single line, which reduces the number of separate connections and the equipment's complexity, and helps lower the failure rate.<br>Electric slip ring \u2014 passes supply and signal lines through a rotating interface, which simplifies wiring and makes maintenance easier.<br>Quiet motor \u2014 designed to keep noise down while running at speed, which supports a quieter test area.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Complete Technical Specifications<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td>Modelo: 300 KG<\/td><td>Fuerza de tracci\u00f3n nominal: 300 kg<\/td><td>Di\u00e1metro del cable: 6 mm<\/td><td>Longitud del cable: 300 m<\/td><\/tr><tr><td>Potencia del motor: 2,2 kW<\/td><td>Velocidad del tambor: 48,5 rpm<\/td><td>Velocidad de la cuerda: 40-60 m\/min<\/td><td>&nbsp;<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td>Modelo: 300 KG<\/td><td>A (Longitud): 960 mm<\/td><td>B(Ancho): 799 mm<\/td><td>C(Altura): 1030 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Size Installation and System Interface<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Outline (case 300KG): A 960 \u00d7 B 799 \u00d7 C 1030 mm.\nReel: single-plate reel diameter 711 mm, reel length 430 mm (drawing).\nLayout: side-plate construction \u2014 drum assembly between a motor-side side plate and a shaft-side side plate; side plates are the mounting\/structural members.\nRope guiding: rope guider assembly (DSQZC-00-00-00) with a 16A chain drive (chain 54 links, driving sprocket 13T, driven sprocket 26T) inside a chain box; a guard plate  and chain box cover the drive.\nElectrical interface: slip ring (purchased part) for power and signal transfer; confirm the required channels, current, voltage and speed limit.\nManual interface: hand wheel (purchased part) and a clutch device for manual rope-guider adjustment.\nLifting \/ handling: 4 lifting rings are listed in the assembly drawing for hoisting the unit.\nMounting: confirm the mounting interface, bolt sizes and the base detail on the approved drawing.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Control Safety and Protection<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>- Rope guiding: automatic rope guider with 16A chain drive, covered by a chain box and guard plate  \u2014 lays the rope in order and helps prevent tangling.\n- Rope protection: cable rope guard ring \u2014 helps protect the rope from abrasion and helps keep it in position.\n- Manual intervention: clutch device allows the rope guider to be adjusted by hand; a hand wheel is provided.\n- Power \/ signal transfer: electric slip ring \u2014 passes supply and signal lines through the rotating drum.\n- Quiet operation: quiet motor is specified to keep test-area noise down at speed.\n- Recommended to confirm: upper\/lower limit switches, slack-rope detection, overspeed protection, emergency stop, brake requirement, duty classification, ingress protection, earthing, and the slip-ring insulation and rating.\n- Optional: drum divider flange, manual emergency crank, VFD control panel, pulley, encoder with main-shaft limit switch, pendant remote control, limit switch, rope follower, winding device, grooved drum, slack-rope switch, slip ring, class certificates (LRS \/ BV \/ ABS \/ DNV GL).<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Customization Options and Engineering Process<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Configured around your operating conditions \u2014 Share the required line pull, rope travel and diameter, operating speed, duty cycle, power supply, installation envelope and environment. KLD will review the application and provide a proposed configuration, technical drawing and quotation for approval. Free 3D design models are provided for different scenarios.\nRequirements \u2192 Concept \u2192 Drawing &amp; Quotation \u2192 Approval \u2192 Production &amp; Test \u2192 Delivery<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Standards Testing and Quality<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>The company operates an ISO 9001 quality management system. CE conformity documents (LVD, EMC) are available for applicable configurations on request.\n\nFactory testing follows the approved technical specification for each configured unit and may include: no-load run, rated-load operation, brake function, independent-motor control verification, limit and encoder function checks. Available documentation may include dimensional drawings, electrical diagrams, inspection records and functional test results, depending on project scope.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Engineering Cases<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Reference: an airship test programme needed an umbilical winch able to raise and lower an airborne test platform while supplying it with power and communication over the same line. The test area also had to stay quiet during high-speed runs.\n\nSolution: cable winch, case model 300KG \u2014 composite cable rope (power + communication in one line), electric slip ring for continuous power and signal transfer, automatic rope guider with 16A chain drive, clutch device for manual rope-guider adjustment, cable rope guard ring, quiet motor. Rated pull 300 kg, rope \u00d86 mm \u00d7 300 m, motor 2.2 kW, drum speed 48.5 rpm, rope speed 40\u201360 m\/min. Outline 960 \u00d7 799 \u00d7 1030 mm.\n\nOutcome: the configuration matched the programme's lift height, power\/signal and noise requirements, and passed acceptance.<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Technical Data Download<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Downloads:\n- Product Datasheet (PDF)\n- General Arrangement Drawing (PDF)\n- Installation &amp; Operation Manual (PDF)\n- Request CAD \/ Electrical Drawing<\/code><\/pre>\n\n\n\n<h2 class=\"wp-block-heading\">Delivery Packaging and Lifecycle Support<\/h2>\n\n\n\n<pre class=\"wp-block-code\"><code>Most winches are custom-made products; lead time is confirmed after technical approval and order review. Project support can include configuration review, drawing approval, factory testing, export packaging, remote commissioning support and recommended spare parts. On-site measurement and installation support are available for applicable projects.<\/code><\/pre>","protected":false},"excerpt":{"rendered":"<p>A cable winch built for airship ground testing as an umbilical winch. A composite cable rope carries both power and communication, which reduces the number of separate connections. Fitted with an electric slip ring, an automatic rope guider, a clutch device and a quiet motor. Case configuration: 300 kg rated pull, rope \u00d86 mm \u00d7 [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":823,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2,98,36],"tags":[],"class_list":["post-820","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","category-heavy-duty-electric-winches","category-industrial-electric-winches-products"],"_links":{"self":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/820","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/comments?post=820"}],"version-history":[{"count":4,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/820\/revisions"}],"predecessor-version":[{"id":8059,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/820\/revisions\/8059"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/media\/823"}],"wp:attachment":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/media?parent=820"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/categories?post=820"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/tags?post=820"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}