{"id":942,"date":"2025-06-26T09:10:13","date_gmt":"2025-06-26T09:10:13","guid":{"rendered":"https:\/\/kldwinch.com\/?p=942"},"modified":"2026-10-21T09:02:45","modified_gmt":"2026-10-21T09:02:45","slug":"cabrestante-electrico-de-acero-inoxidable","status":"publish","type":"post","link":"https:\/\/kldwinch.com\/es\/stainless-steel-electric-winch\/","title":{"rendered":"Stainless steel friction winch 100kg 316 rope groove drum | KLD"},"content":{"rendered":"

A 100 kg friction-drive winch built in 316 stainless steel. Wire rope is not wound onto a drum for storage; instead it passes around a multi-groove drum and the pull is transmitted by friction, so the rope runs through the machine rather than accumulating on it. A 0.4 kW three-phase motor turns the drum at 14.4 rpm, giving an average rope speed of 5 m\/min over \u00d84 mm rope. The shaft between drum and motor is extended to 211 mm, which puts the motor and its windings further from the hot zone. A mechanical limit switch sets the stopping position, and control is by pendant from a separate control box. Outline is 640 \u00d7 390 \u00d7 256 mm.<\/p>\n\n\n\n

Quick Specs<\/h2>\n\n\n\n
Model: PJM-100\nRated pull: 100 kg\nWire rope: \u00d84 mm \u2014 passes through, not stored on the drum\nMotor: 0.4 kW, three-phase 380 V \/ 50 Hz\nDrum speed: 14.4 rpm\nAverage rope speed: 5 m\/min<\/code><\/pre>\n\n\n\n
Application Scenarios and Applicable Boundaries<\/strong><\/h2>\n\n\n\n
- Continuous rope travel where the rope has to pass through the machine rather than accumulate \u2014 cable or hose handling, and pulling duties where the rope keeps moving in one direction\n- Wet, salt-laden or chemically aggressive surroundings, where 316 stainless is chosen over painted steel\n- Locations where the motor has to sit away from a hot zone \u2014 the 211 mm shaft extension exists for this\n- Low-tension pulling of light loads up to 100 kg at 5 m\/min\n- Installations needing a mechanical stop position set on site\n- Applications where a compact, low-profile unit is required \u2014 256 mm high<\/code><\/pre>\n\n\n\n
Features Benefits<\/h2>\n\n\n\n
The shaft between drum and motor is extended to 211 mm \u2014 a dimensioned feature on the drawing, not a marketing figure. Its effect is to move the motor, its windings and its bearings away from the hot zone around the drum. Motor insulation and bearing grease are usually the first things to fail in a hot location, and separating them from the heat source is a structural answer rather than a rating claim.
A mechanical limit switch sets the stopping position on site. Being mechanical and separate from any controller, it does not depend on software to stop the rope at the intended point.
Control is by pendant from a separate control box, so the operator stands away from the machine while setting up and running. On a unit that may be mounted in a hot or wet location, having the controls on a lead is a practical advantage.<\/p>\n\n\n\n
Complete Technical Specifications<\/h2>\n\n\n\n
\"\"<\/figure>\n\n\n\n
Modelo: 100 kg<\/td>Potencia del motor: 0,4 kW<\/td>Fuerza de tracci\u00f3n nominal: 100 kg<\/td>Di\u00e1metro del cable de acero: 4 mm<\/td>Velocidad del tambor: 14,4 rpm<\/td>Velocidad media de la cuerda: 5 m\/min<\/td>Voltaje de funcionamiento: 3P\/380V\/50Hz<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
Modelo: 100 kg<\/td>A (Longitud): 640 mm<\/td>B(Ancho): 390 mm<\/td>C(Altura): 256 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
Size Installation and System Interface<\/h2>\n\n\n\n
1. Mount the base plate flat and level. The 4 \u00d7 \u00d816 holes take bolts sized for the pull reaction, not just the machine weight \u2014 100 kg of pull acting at 256 mm above the base produces a moment the bolts have to resist.\n2. Plan the rope run before mounting: the rope enters and leaves the machine, so both the incoming and outgoing runs need clear route and the slack side needs to be able to carry tension. A run where the slack side drops to the floor will not transmit the rated pull (see 6.4).<\/code><\/pre>\n\n\n\n
Control Safety and Protection<\/h2>\n\n\n\n
Drive: 0.4 kW three-phase induction motor, 380 V \/ 50 Hz, drum speed 14.4 rpm, average rope speed 5 m\/min.\nTransmission: friction \u2014 rope passes around a multi-groove drum; no storage winding.\nControl: pendant from a separate control box.\nEnd stop: mechanical limit switch, set on site.\nBrake: not specified in the material supplied (see 6.5).<\/code><\/pre>\n\n\n\n
Customization Options and Engineering Process<\/h2>\n\n\n\n
Configured around your operating conditions \u2014 Share the required line pull, rope travel, operating speed, duty cycle, power supply, installation envelope and environment. KLD will review the application and provide a proposed configuration, technical drawing and quotation for approval. Free design schematics are provided for different scenarios.<\/code><\/pre>\n\n\n\n
Requirements \u2192 Concept \u2192 Drawing & Quotation \u2192 Approval \u2192 Production & Test \u2192 Delivery<\/code><\/pre>\n\n\n\n
Standards Testing and Quality<\/h2>\n\n\n\n
The company operates an ISO 9001 quality management system. CE conformity documents (LVD, EMC) are available for applicable configurations on request. Classification certificates (e.g. LRS \/ BV \/ ABS \/ DNV GL) can be arranged as an optional item for marine applications.\n\nFactory testing follows the approved technical specification for each configured unit and may include: no-load run, rated-load operation, brake function, limiter function and control verification. Available documentation may include dimensional drawings, electrical diagrams, inspection records and functional test results, depending on project scope.<\/code><\/pre>\n\n\n\n
Engineering Cases<\/h2>\n\n\n\n
Application: a light pulling duty in a corrosive and hot environment, where the rope had to keep running through the machine rather than be stored on a drum, and where the motor had to be kept away from the heat source.\nConfiguration supplied: PJM-100 stainless friction winch. 316 stainless drum and end covers; multi-groove drum for friction transmission. 0.4 kW three-phase motor at 380 V \/ 50 Hz, drum speed 14.4 rpm, average rope speed 5 m\/min over \u00d84 mm rope. 211 mm shaft extension between drum and motor. Mechanical limit switch, pendant control from a separate box. Outline A 640 \u00d7 B 390 \u00d7 C 256 mm.<\/code><\/pre>\n\n\n\n
Technical Data Download<\/h2>\n\n\n\n
Downloads:\n- Product Datasheet (PDF)\n- General Arrangement Drawing (PDF)\n- Installation & Operation Manual (PDF)\n- Request CAD \/ Electrical Drawing<\/code><\/pre>\n\n\n\n
Delivery Packaging and Lifecycle Support<\/h2>\n\n\n\n
Most winches are custom-made products; lead time is confirmed after technical approval and order review. Project support can include configuration review, drawing approval, factory testing, export packaging, remote commissioning support and recommended spare parts. On-site measurement and installation support are available for applicable projects.<\/code><\/pre>","protected":false},"excerpt":{"rendered":"
A 100 kg friction-drive winch built in 316 stainless steel. Wire rope is not wound onto a drum for storage; instead it passes around a multi-groove drum and the pull is transmitted by friction, so the rope runs through the machine rather than accumulating on it. A 0.4 kW three-phase motor turns the drum at […]<\/p>\n","protected":false},"author":1,"featured_media":944,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2,44],"tags":[],"class_list":["post-942","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","category-friction-winches"],"_links":{"self":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/942","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/comments?post=942"}],"version-history":[{"count":7,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/942\/revisions"}],"predecessor-version":[{"id":8110,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/posts\/942\/revisions\/8110"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/media\/944"}],"wp:attachment":[{"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/media?parent=942"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/categories?post=942"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kldwinch.com\/es\/wp-json\/wp\/v2\/tags?post=942"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}