Portable cable hauling winch for cable laying assistance, with a U-groove drum that improves friction output, a right-angle gear motor, a separate control box and a foot switch. Case model PJD-500: rated tension 500 kg, 0.75 kW motor, 17.75 rpm reel speed, 5 m/min average rope speed, 6 mm rope, 1-phase 220 V supply. Outline 270 × 462 × 639 mm.
Portable Cable Hauling Winch 500kg Foot Switch | KLD
-
A portable cable hauling winch built for heavy cable laying work, used as an auxiliary hauling device. The U-groove drum improves friction output for smoother cable laying. A right-angle gear motor, a separate control box and a foot switch make operation simpler and support operator flexibility and safety. 220 V single-phase input suits a range of working situations.
Especificaciones rápidas
Model: 500kg | Rated tension: 500 kg | Motor power: 0.75 kW Rope diameter: 6 mm | Reel speed: 17.75 rpm | Average rope speed: 5 m/minEscenarios de aplicación y límites aplicables
- Cable laying assistance — designed for heavy cable laying work as an auxiliary hauling device; the U-groove drum improves friction output so the cable runs smoothly. - Cable pulling over short, repeatable runs — the case unit has a 500 kg rated tension with a 5 m/min average rope speed and a 6 mm rope, which suits steady, controlled hauling rather than high-speed winding. - Work where the operator must stand clear of the machine — a separate control box can be placed at a different position and the foot switch allows flexible operation by the worker. - Sites with single-phase power only — 1P / 220V / 50Hz input adapts to typical standard electrical equipment on site. - Portable / relocatable duty — the machine is a compact foot-mounted unit (about 270 mm wide) with lifting rings, so it can be moved between work positions. Boundary: the case model is 500 kg rated tension with a 0.75 kW motor, 17.75 rpm reel speed and 5 m/min average rope speed; 6 mm rope; 1P/220V/50Hz supply; whole machine weight 65 kg per drawing (50 KG per detail page table). Outline 270 × 462 × 639 mm per detail page (drawing 270 / 461.85 / 628.77 mm). This is a non-standard product; load, speed, rope length, control mode, rope exit direction and material are customized to site requirements. Confirm the duty, rope length, power supply and mounting interface before ordering.Características Beneficios
Better friction output — the U-groove drum makes it easier for the winch to deliver friction power, so hauling is more consistent.
Quiet, efficient drive — the right-angle gear motor runs quietly, which reduces noise pollution and improves working comfort.
Control from where you need it — the separate control box can be placed at a different position so the machine can be controlled from a distance, which supports working safety and convenience.Especificaciones técnicas completas
Modelo: 500 KG Potencia del motor: 0,75 kW Tensión nominal: 500 kg Diámetro de la cuerda: 6 mm Velocidad de rotación del tambor: 17,75 rpm Velocidad media de la cuerda: 5 m/min Peso: 50 kg Tensión nominal: 1P/220V/50HZ Modelo: 500 KG A (Longitud): 270 mm B(Ancho): 462 mm C(Altura): 639 mm Tamaño Instalación e interfaz del sistema
Outline (case 500kg): 270 × 462 × 639 mm (A length × B width × C height) per the detail page; drawing values 270 / 461.85 / 628.77 mm. Base / mounting: a foot-mounted base plate with slotted mounting holes; the drawing shows bolt slots on the base flange. Confirm the hole pattern and the structural interface on the approved drawing. Drive: right-angle gear motor (0.75 kW) mounted vertically on the gearbox housing; the motor is a separate assembly bolted to the frame. Drum: U-groove drum with a rope path width of 170 mm per drawing; rope diameter 6 mm. Lifting points: lifting rings are fitted for moving the unit; the drawing views show two rings. Control interface: separate control box connected to the machine, plus a foot switch . Electrical: 1P / 220V / 50Hz single-phase input; confirm the plug type and cable length for the site.Control, seguridad y protección
- Control: separate control box that can be positioned away from the machine, plus a foot switch for hands-free operation. - Drive: right-angle gear motor, quiet running; 0.75 kW. - Drum / rope: U-groove drum for friction pull; rope diameter 6 mm; reel speed 17.75 rpm; average rope speed 5 m/min. - Rated tension: 500 kg. - Electrical: 1P / 220V / 50Hz single-phase; confirm earthing and protection for the site. - Lifting / moving: lifting rings fitted; the machine is a compact single unit. - Recommended to confirm: duty classification, required brake or holding arrangement, limit switch type and the maximum cable tension for the specific cable being laid. - Optional: pulley, limit switch, grooved drum, drum divider flange, manual emergency crank, VFD control panel, encoder with main-shaft limit switch, pendant remote control, rope follower, winding device, slack-rope switch, slip ring, class certificates (LRS / BV / ABS / DNV GL).Opciones de personalización y proceso de ingeniería
Configured around your operating conditions — Share the required line pull, rope length, operating speed, duty cycle, power supply, installation envelope and environment. KLD will review the application and provide a proposed configuration, technical drawing and quotation for approval. Free design schematics are provided for different scenarios. Requirements → Concept → Drawing & Quotation → Approval → Production & Test → DeliveryNormas, pruebas y calidad
The company operates an ISO 9001 quality management system. CE conformity documents (LVD, EMC) are available for applicable configurations on request. Factory testing follows the approved technical specification for each configured unit and may include: no-load run, rated-load operation, brake holding function and control verification. Available documentation may include dimensional drawings, electrical diagrams, inspection records and functional test results, depending on project scope.Casos de ingeniería
a cable laying project needed an auxiliary hauling device to pull heavy cable over a short, repeatable run. The site had only single-phase power available, and the operator needed to control the machine while standing away from the hauling point, with both hands free. Solution: portable cable hauling winch PJD-500 — 500 kg rated tension, 0.75 kW right-angle gear motor, 17.75 rpm reel speed and 5 m/min average rope speed; 6 mm rope; U-groove drum to improve friction output; separate control box plus foot switch; 1P/220V/50Hz single-phase input. Outline 270 × 462 × 639 mm. Two spare motors of the same model and three sets of service shims were supplied with the unit. Outcome: the unit met the project's rated tension, power supply and operator-control requirements, and passed the customer's acceptance procedure.a cable laying project needed an auxiliary hauling device to pull heavy cable over a short, repeatable run. The site had only single-phase power available, and the operator needed to control the machine while standing away from the hauling point, with both hands free. Solution: portable cable hauling winch PJD-500 — 500 kg rated tension, 0.75 kW right-angle gear motor, 17.75 rpm reel speed and 5 m/min average rope speed; 6 mm rope; U-groove drum to improve friction output; separate control box plus foot switch; 1P/220V/50Hz single-phase input. Outline 270 × 462 × 639 mm. Two spare motors of the same model and three sets of service shims were supplied with the unit. Outcome: the unit met the project's rated tension, power supply and operator-control requirements, and passed the customer's acceptance procedure. -
-
What is the case specification?
Model PJD-500: rated tension 500 kg, 0.75 kW motor, 6 mm rope, reel speed 17.75 rpm, average rope speed 5 m/min, 1P/220V/50Hz supply. Whole machine weight 65 kg per the drawing (50 KG per the detail page table). Outline 270 × 462 × 639 mm.
-
What does the U-groove drum do?
The U-groove drum improves friction output so the winch can pull the cable more consistently. The drawing shows a 170 mm rope path width.
-
Can the operator work away from the machine?
Yes. The control is a separate control box that can be placed at a different position, and a foot switch allows hands-free operation.
-
obtener una cotización




